Fraste Multidrill PL G

Multipurpose drilling rig with 5353 working hours

Diesel engine: 

Kubota diesel engine type V2607-DI-T-E3B, 4-cylinders turbo , water cooled, displacement cc 1500 - Rpm counter, hour meter, electric system, 12 Volts battery included

 Power: 49 kW (66 Hp) @ 2700 rpm. Stage III A TIER 3 

Complete with canopy. Chalwyn valve mounted on the diesel engine air manifold, Chalwyn spark arrestor, ATEX certified.

Fuel tank capacity: 70 litres.

Hydraulic system: 

Nr. 01 pistons pump with variable displacement, in Load Sensing, max. delivery 148 lt/min each - 280 bar pressure to feed one proportional distributor; 

Nr. 01 gears pump, 26 lt/min delivery, 220 bar pressure for feeding of valves blocks for all drilling rig functions. 

10 micron absolute filtering system with filters on pressure and discharge lines and hydraulic oil cooler included.

Oil tank capacity: 100 litres. 

The hydraulic system is suitable for the use of the radio remote control for drilling functions.

Rubber crawler carrier PTT 4000 daN. 

Max. width mm 1000 1400. 

Shoe width mm 250. 

Speed 3 km/h.

Rotary head

4 speed max torque 450daNm @ 65rpm, max drilling speed 540rpm @ 55daNm

Percussion operation :

Furukawa type FX 25 hydraulic hammer.

Power :370 Joules

Frequency :1300 blows/ min

Hydraulic drilling clamp 

Clamping diameters mm 40 250 mm for drill pipes and casing holding and breaking.

Hydraulic winch. 

Maximum single line pull 1000 daN 1st layer. 

Speed: 55 m/min. 

Supplied with 30 m cable diam. 8 mm, turning hook, weight and cable tensionner included.

Pump

Bean/FMC L06 type, Triplex Piston mud pump. 

Hydraulic driven. Adjustable speed from control panel.

Relief valve and pressure adjustment device included. 

Max pump delivery: 150 l/min. 

Max working pressure: 30 bars.