Overview
Machine location:
Europe
Stock number:
PF 41244
Manufacturer:
Atlas Copco
Model:
Christensen CS-14
Year of manufacture:
2012
Working hours:
8000
Key features
2012 Atlas Copco Christensen CS14 exploration core drilling rig with 8,000 working hours, powered by a 153 kW Cummins QSB6.7 Tier III diesel engine.
B wireline depth capacity: 1,540 m
N wireline depth capacity: 1,200 m
H wireline depth capacity: 800 m
P wireline depth capacity: 475 m
Main hoist single-line capacity: 80 kN
Mast feed travel: 3.5 m
Maximum feed pull: 138 kN
Maximum feed thrust: 59.6 kN
Drilling angle: 45° to 90°
Rod pull length: 6.09 m
Maximum spindle speed: 1,300 rpm
Hydraulic chuck with 18,143 kg holding capacity
Hydraulic rod holder with 13,000 kg holding capacity
Trailer-mounted drilling rig with hydraulic levelling jacks
Operating weight: 7,000 kg
Machine specs
Drilling Capacities
B wireline: 1,540 m
N wireline: 1,200 m
H wireline: 800 m
P wireline: 475 m
Capacities based on vertical drilling
Mast and Feed System
Feed travel: 3.5 mFeed control: Variable fast and slow speeds
Maximum thrust: 59.6 kN
Maximum pull: 138 kN
Drilling angle: 45° to 90°
Rod pull length: 6.09 m
Drill Head
Drive: Variable-speed reversible hydraulic motor
Final drive: Four-speed chain drive with oil-bath lubrication
Spindle inside diameter: 117 mm
First gear: 117-196 rpm / 5,113-3,051 Nm
Second gear: 245-410 rpm / 2,445-1,459 Nm
Third gear: 451-756 rpm / 1,326-792 Nm
Fourth gear: 776-1,300 rpm / 771-460 Nm
Hinged swing-away drill head
Main Hoist
Single-line capacity: 80 kN
Line speed at bare drum: 44 m/min
Cable: 35 m x 16 mm
Wireline Winch
Capacity with 4.76 mm cable: 1,830 m
Capacity with 6.35 mm cable: 975 m
Line pull at bare drum: 11.9 kN
Line pull at full drum: 3.0 kN
Line speed at bare drum: 114 m/min
Line speed at full drum: 453 m/min
Chuck Assembly
Type: Hydraulic open, spring closed
Maximum inside diameter: 117 mm
Holding capacity: 18,143 kg
Rod Holder
Type: Hydraulic open, gas-spring closed
Maximum inside diameter: 210 mm
Holding capacity: 13,000 kg
Power Unit
Engine manufacturer: Cummins
Engine model: QSB6.7 Tier III
Configuration: 6.7-litre, six-cylinder
Installed power: 153 kW / 208 hp
Rated engine speed: 1,800 rpm
Engine type: Turbocharged and after-cooled diesel
Cooling system: Water cooled
Hydraulic System
Primary pump: 242 litres/min at 280 barSecondary pump: 122 litres/min at 200 bar
Auxiliary pump: 47 litres/min at 215 bar
Hydraulic oil cooling: Air cooled
Drill Base and Supports
Base configuration: Trailer mounted
Running gear: Four 770 mm wheels
Supports: Four hydraulic levelling jacks
Jack pad diameter: 200/230 mm
Jack travel: 550 mm
Transport Dimensions and Weight
Length: 6,370 mm
Width: 2,200 mm
Height: 2,340 mm
On-site transport with top mast folded:
Length: 6,370 mm
Width: 2,550 mm
Height: 2,340 mm
Operating weight with Trido 140 drill head and rod holder: 7,000 kg
Enquire about this machine
Fill in your details below and we’ll will be in touch with more information
Or give us a call: +44 (0) 1642 206 100
Download PDF
Fill in your details below to download a spec sheet
Enquire about this machine
Fill in your details below and we’ll will be in touch with more information
Or give us a call: +44 (0) 1642 206 100