Head carriage with 12 adjustable and adjustable rollers for a stroke of 4000 mm
Head movement ensured by a chain actuated by a hydraulic cylinder
Max pressure 35 kN and withdrawal max. 63.5 kN
Forward speed: 0 to 48 m / min
Ascent speed: 0 to 27 m / min
Restraint limiter
Rotation table type T1200 6V
Max torque 13,550 Nm
Max speed 530 rpm
H800 driver for and 3 Inch 1/2 male end API Reg
Air / water injection head with 104 mm passage
Double locking and unlocking jaws type M4 – M4S
Diameters: 60 – 305 mm
Locking force: 250 kNm
Release torque: 45 kNm
Set of inserts diam. 60-305 mm
Rod centring device
Type A2 service winch
Nominal force: 20 kN
Max speed cable: 54 m / min
Jib crane for A2 winch
Foam cleaning pump C35
Continuous pressure: 35 bars
Flow rate: 30 l / min
Energy consumption: 3 kW
Line lubricator with 8 l oil tank
Hydraulic actuated 2 Inch three-way valve
PH15 pump: (for self-drilled or mud drilling)
Continuous pressure: 45 bars
Flow: 6 m3 / hour
Energy consumption: 6 kW
Suitable for Drilling for tie rods, Drilling For Micro Piles, Boreholes for small diameter CFA piles, Soil reconnaissance drilling, Geothermal drilling, Continuous auger drilling
sales@sigmaplantfinder.com
+44 (0) 1642 206 100
